Re: 4x 306 Cyclone Alloy Wheels For Sale!!

by **Simon** Thu 12 Aug 2010, 00:54

Which year 307 they from?

older 1s are ET32 newer 1s are ET37 iirc

for the older you'd need 17mm spacer and newer 22mm

those are figures for lowering the car past 40-50mm so it doesn't rub on inner arch and i'd say would still be fine on outer arch

by **SCFC_Messiah** Thu 12 Aug 2010, 02:15

I bought them individually on eBay, so I bet I have a miss match thumbs down

I'll check them now

Out of interest, how much to have them machined down on the lathe? And would I need new bolts then?

Thanks Simon

by **Simon** Thu 12 Aug 2010, 02:34

I'll have a word with the father in law see how much he'd want mate

bolts should be fine, if you drive the car down we can check how they go on and make sure they dont go through too far, if they do we can cut a bit off the end and tapper it so is starts fine

by **SCFC_Messiah** Mon 16 Aug 2010, 21:42

Simon, I've just checked and on the back of both rear wheels I have '6 1/2Jx16 CH4-31'

Which matches up with the dimensions found here for Arianes: http://www.peugeot.ie/templates/peugeot2010/downloads/PEUGEOT_ALLOY_WHEELS-2009.pdf

Does that mean I have ET31s!?!? If so, what size spacers would you recommend?

by **Simon** Mon 16 Aug 2010, 22:17

Yeah they are 31mm offset so 16mm would give you an ET15 offset which would be perfect

by **SCFC_Messiah** Mon 16 Aug 2010, 23:13

Brilliant. I take it I'll get away with 15mm? Ive been offered a set for cheap

by **Simon** Mon 16 Aug 2010, 23:44

yeah 15mm would be fine

by **SCFC_Messiah** Mon 16 Aug 2010, 23:52

Thanks for all your advice Gunge. Much appreciated

Now, anyone want to buy a set of Cyclones? £80 collected Smile

by **Simon** Tue 17 Aug 2010, 02:08

Good price mate but i have 3 sets sat in my shed now

by **AlexJ** Wed 18 Aug 2010, 09:32

I am fairly certain my missus and parents will kill me if I buy yet another set of wheels, altgough they would be good to refurb and sell on... Hmm I shall have to think about this, are there any chunks taken out of the wheel or is it just paint damage?

by **SCFC_Messiah** Wed 18 Aug 2010, 23:49

I want to be as honest as possible. There's a fair bit of kerbing, but most of it is simple enough to put right when refurbishing

However, there's one chunk which is worse than the rest. I imagine this will need to be ground back a little, then filled with that metal filler stuff. I MAY have a tub of that Isopon Metalik lying around somewhere - if so, I will throw it in free of charge (it's about £10 in Halfords iirc), but I can't promise I have any

by **SCFC_Messiah** Wed 18 Aug 2010, 23:57

Sorry, I just checked and I don't have any metal filler. Forget I said anything! Embarassed

by **_Mike_** Thu 19 Aug 2010, 03:48

I'll come and get these tonight at £60

by **SCFC_Messiah** Thu 19 Aug 2010, 04:52

Sorry mate, but I really can't afford to go cheaper than £80.

I'm confident I can get that for them, even if it takes me a little while longer to sell

by **SCFC_Messiah** Sat 21 Aug 2010, 05:55

Sold them on other forum. Got £100 for them Very Happy

by **_Mike_** Sat 21 Aug 2010, 07:23

Good effort!

Lucky to get that with the overal condition Smile

by Sponsored content