2x nile gti-6's breaking

over the christmas brake i'm hopeing to have some help to remove some parts from my breaking cars

if you can list the parts you want i'll remove them first

1 is my mates old car which is accident damaged eng/box brakes interior sold most panels are damaged

other is chris's old s/c'd '6' which has also got damage the engine is going in my rallye so hands off this has the front calipers with ferodo ds2500(?) pads which were only put on a few months before the accident

both cars have spax lowering springs

neither car has
interior
wheels


ask away

if i help you will you give me the braiks cheep cheep.ill take the lump out or somthink?

The inlet manifold and associated bits to fit on the xsi lump?

309-gti6-turbo wrote:if i help you will you give me the braiks cheep cheep.ill take the lump out or somthink?

front brakes sold

Ollie_N wrote:The inlet manifold and associated bits to fit on the xsi lump?

not got engine bits available sorry, 1st 1 mike has the eng/box and the 2nd in sc'd

bah fair enough, don't want to fiddle with my one fitting it to the xsi then have to mod it for my 6 engine

not as smple as just fitting would need a map

is the stock ECU remappable?

gti 1 is not sure on the xsi 1 though, dont think it is

when mine was running the gti manifold set up i had the dastek to smooth thing out

Hmm, might just leave it for a bit Got a DTAS60 but i'm saving it for the 6 engine. Would be nice to get a bit more poke out of her before the engine is built tho

i'd do decat and system on it that can also be used on the 6 engine too

Yeah, been thinking of that for a while, I know my cat is on it's way out too so even more reason to get some new stuff down there, have to trim the rear bumper mind

well cut your cat up and weld a straight through pipe on it, i've got a good cat for £40 that you can put back on for MOT time as for bumper just get a gti/phase 3 looks much better than a cut phase 2

some pics of the cars i took today

is that the car i pulled out with my car?

Has the other one got black c pillar trims?

both of those are phase2 but may rallye is phase3 and has black pillars so i'd have a pair

rear beam in good nick on one of them??

if so how much??

and allso how much for a rear bumper with exhaust cut out

si, you know the boot lid with the glass intact, is it still there? and does it have a ding in it?? i could see it in one of the photos...by the nurburgring sticker...and is it rust free?? sorry about the questions,lol, im a fussy fu*ker

sarahsix wrote:si, you know the boot lid with the glass intact, is it still there? and does it have a ding in it?? i could see it in one of the photos...by the nurburgring sticker...and is it rust free?? sorry about the questions,lol, im a fussy fu*ker

not really looked at that 1 tbh, but i do have another nile with glass if you look in pic 5 its on the left you can have a pick of the best if you like

Dans 306 wrote:rear beam in good nick on one of them??

if so how much??

and allso how much for a rear bumper with exhaust cut out

rear beam is £60

i have 2rear bumpers the 1 on the car has a crack on the o/f corner but will repair easy enough £15 or the other is tidy apart from scratches on it £35