40mm lowering springs 306, 1.4/1.6

I have a set of BRAND NEW front lowering springs for a 306 1.4/1.6, they should fit a 1.8 and 1.9d too but it doesnt say on the box. I got them from GSF, They have GSF on the box but not sure who actually makes them.

£30.

I bought them for my Dturbo but decided aganst using them as they're thinner than the standard ones so i got proper Dturbo ones instead.

im interested, but ive got to wait until i get some spacers so i can fit my wheels on to see if they will fit

loads of spacers on e-bay, simon has a pack of 4 10mm spacers too.

think on last clear out i found 3 sets of 4 10mm spacers

Have you still got the long bolts Si? thinking I might get the 17s on for FCS.

Will 10 mil give me the clearance for 17s? my boss is close with west wales rally spares so he is talking to them for me, but if anybody has them going im interested.

Do you know the offset of your wheels jeebz, mine are et25 and rub slightly on the inside.

MickeyVTS wrote:Have you still got the long bolts Si? thinking I might get the 17s on for FCS.

yeah still got a set (maybe 3 )

jeebz wrote:Will 10 mil give me the clearance for 17s? my boss is close with west wales rally spares so he is talking to them for me, but if anybody has them going im interested.

As mickey says need to know the wheels offset to give the correct advise mate
ideal offset for 306 is ET15-18 but on mine i have had to run ET12 as im running 8" width 18s

hmm ok, ill have a look in the morning. The ET should jusat be stamped on them to make it easy for me right?

Usually yes.

Yeah it will either be stamped ET ?? or just a 2 digit number in a circle

My 17s are et25, fit fine on the front and i had to use 7mm spacers on the rear. All fits nice. 10mm spacers will clear the inner plastic arch cover, i had to take my covers off. Will be modifying them and putting them back on tho.