309 Goodwood
2 posters
Page 1 of 1
309 Goodwood
One of 115 remaining 5 door models, approx 398 produced in total (half 5 door half 3 door)
Make/model: Peugeot 309 Goodwood
Age/reg: 1993 K
Colour: Green of course!
Miles: 101k
Service history: sparse I'm afraid, previous owner had mislaid the folder.
MOT until: No
Tax until: on SORN
Number of previous owners:
Tyres fitted: Avon's front Regal rear, all road legal circa half worn.
Modifications: Too farking low on the front Gmax springs+dampers (were fitted when I got it)
Any more information: Fully rebuilt rear beam with new arm shafts + bearings seals etc, set to std height IIRC, can be adjusted easily.
New standard exhaust fitted, New distributor, Intake pipework returned to standard airbox.
s/h lockset sourced and fitted, one key.
Side trim panels with incorrect red stripe replaced with new and s/h items with the stripe covered in Chrome Vinyl to replicate original items (which have been NLA for years)
All work carried out has been documented in Photographs, its in pretty good condition unlike some 309's I have seen which have been so rusty you would not believe.
Bad Points: Lacquer peel limited to spoiler only, rest of paint in VGC, no front fog+spot lamps (lack of funds to replace them)
A few small dents and marks.
Price: £1200 OVNO
Click on images for larger versions, I have a new trim panel for the drivers door just needs fitting and am looking for the one for the passenger rear door.
BTT....
Make/model: Peugeot 309 Goodwood
Age/reg: 1993 K
Colour: Green of course!
Miles: 101k
Service history: sparse I'm afraid, previous owner had mislaid the folder.
MOT until: No
Tax until: on SORN
Number of previous owners:
Tyres fitted: Avon's front Regal rear, all road legal circa half worn.
Modifications: Too farking low on the front Gmax springs+dampers (were fitted when I got it)
Any more information: Fully rebuilt rear beam with new arm shafts + bearings seals etc, set to std height IIRC, can be adjusted easily.
New standard exhaust fitted, New distributor, Intake pipework returned to standard airbox.
s/h lockset sourced and fitted, one key.
Side trim panels with incorrect red stripe replaced with new and s/h items with the stripe covered in Chrome Vinyl to replicate original items (which have been NLA for years)
All work carried out has been documented in Photographs, its in pretty good condition unlike some 309's I have seen which have been so rusty you would not believe.
Bad Points: Lacquer peel limited to spoiler only, rest of paint in VGC, no front fog+spot lamps (lack of funds to replace them)
A few small dents and marks.
Price: £1200 OVNO
Click on images for larger versions, I have a new trim panel for the drivers door just needs fitting and am looking for the one for the passenger rear door.
BTT....
Re: 309 Goodwood
so tempting i think if i could drive right now i'd be buying this probably the tidiest i've seen for a very long time
how about put some rattle can laqer on the spoiler just to make it look tidier
how about put some rattle can laqer on the spoiler just to make it look tidier
Re: 309 Goodwood
yep, if I get the time I will do it, got the can already
be good for it to go to a Pug enthusiast that'll keep it nice and standard.
be good for it to go to a Pug enthusiast that'll keep it nice and standard.
Re: 309 Goodwood
yeah thats 1 of the reasons i never bought 1 cos i would just play about with it staight away gti-6 eng/box and slam it but keep original wheels and look
Re: 309 Goodwood
I wouldnt mind that at all actually, as long as it looks std, IMO the best goodwood out there has a V6
Re: 309 Goodwood
nope, only the gearbox is, but its far stronger than a BE, you'll get near on 240 bhp once you dump the cat...
mind, this is meant to be a for sale thread
mind, this is meant to be a for sale thread
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum