My Black XS
+3
_Mike_
matt-gti
AlexJ
7 posters
Page 1 of 1
My Black XS
Well my old Black Dturbo went off to West wales for £550, less than 24
hours after i put it on ebay it was sold and collected the next day.
Day after took a trip to the midlands to get Matt_99's XS for £1000 96K
on the clock, bodywork not in great condition but i wasn't expecting it
to be, interior is mint. Only problems were a knackered wheel bearing
and a puncture in one of the Cyclones which are both now fixed. Also
there is a foglight snapped off its brackets, here is one waiting to be
fitted sat in the boot i just can't be arsed to do it yet.
Cleaned it today, spent about 3 hours on it, first time the cleaning
stuff has been out the garage since March so didn't do a very good job
on it but its clean all the same I used
Megs NXT wash
CYC clay with Megs speed detailer
Poorboys blackhole glaze
AutoGlym SRP
Megs NXT tech 2 wax (Liquid)
AutoGlym Fastglass
Washed with a value sponge, Dried with a CYC drying towel, polishes and
waxes applied with megs applicator pads and wiped off with value
microfibre cloths
Unfortunatly i didn't have any wheel cleaner and i'm skint so that will
be bought next month! Had to make do with a sponge and wash.
Then i was a proper dick and drove into a pile of mud, then onto a field.
Turns out this is actually an in use junction!
Multistorey car park shot
Plans for it so far are to keep it on the road and make sure everything
is running tickety boo, then possibly a set of white cyclones...and
thats about it:)
hours after i put it on ebay it was sold and collected the next day.
Day after took a trip to the midlands to get Matt_99's XS for £1000 96K
on the clock, bodywork not in great condition but i wasn't expecting it
to be, interior is mint. Only problems were a knackered wheel bearing
and a puncture in one of the Cyclones which are both now fixed. Also
there is a foglight snapped off its brackets, here is one waiting to be
fitted sat in the boot i just can't be arsed to do it yet.
Cleaned it today, spent about 3 hours on it, first time the cleaning
stuff has been out the garage since March so didn't do a very good job
on it but its clean all the same I used
Megs NXT wash
CYC clay with Megs speed detailer
Poorboys blackhole glaze
AutoGlym SRP
Megs NXT tech 2 wax (Liquid)
AutoGlym Fastglass
Washed with a value sponge, Dried with a CYC drying towel, polishes and
waxes applied with megs applicator pads and wiped off with value
microfibre cloths
Unfortunatly i didn't have any wheel cleaner and i'm skint so that will
be bought next month! Had to make do with a sponge and wash.
Then i was a proper dick and drove into a pile of mud, then onto a field.
Turns out this is actually an in use junction!
Multistorey car park shot
Plans for it so far are to keep it on the road and make sure everything
is running tickety boo, then possibly a set of white cyclones...and
thats about it:)
Re: My Black XS
Looks so clean this one Alex
Needs a gti splitter i say and a spot light
Needs a gti splitter i say and a spot light
_Mike_- Central Regional Leader
- Town/County : Cross Hands
Age : 36
Model owned : 1998 306 GTi6 - VW Polo PD130
Dream Car : Still Deciding
Points : 14234
Date Joined : 2008-07-16
Re: My Black XS
Should've kept the beige seats
MickeyVTS- West Regional Leader
- Town/County : Carmarthen
Age : 54
Model owned : '04 Xsara VTS
Dream Car : .
Points : 14597
Date Joined : 2009-03-31
Re: My Black XS
The beige went ah well! I will be on the lookout for some half leathers in a month or two
Re: My Black XS
AlexJ wrote:The beige went ah well! I will be on the lookout for some half leathers in a month or two
i may have some for sale soon, in talks for a guy to buy a 6 to break
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum